Home download redmi rom xiaomi [ROM] Download Lineage OS For Redmi NOTE 3 Android Nougat 7.1.1

Download and install Lineage OS For Redmi NOTE 3 Kenzo Android Nougat 7.1.1.LINEAGE OS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.


Before Starting

Take care of following tasks before you proceed with flashing custom ROM:
Task 1: Install USB drivers for your device on your PC.
Task 2: Be sure to backup your data including Contacts, SMS / MMS, APN & MMS Settings as well as photos and videos stored on your device’s internal or external storage.
Task 3: Make sure that your device is well charged. Ideally, the battery level should be around 60-80%. The more the better.
Task 4: USB Debugging should be enabled on your device.
Important: Most of the custom ROM will not have Google Apps in them. So, you will have to download and install GApps manually.

Done with preliminary precautionary steps? So, here’s the guide:

TWRP recovery let’s you do a number of cool stuff but the whole point of having a custom recovery is to be able to flash unsigned .zip files. These .zip files could be anything from a custom kernel, boot, recovery, MODs or full custom ROMs.


Let’s see how to flash a lineage os rom on  Redmi NOTE 3 using TWRP recovery.

How to Install a Lineage os ROM using TWRP Recovery


  1. Download and transfer the Lineageos ROM and Gapps for linage os you wish to flash to your device’s storage.
  2. Boot your device into TWRP recovery.
  3. Select “Wipe” from TWRP main menu and do a “Swipe to Factory Reset” on the bottom of screen.
    └ Note: This will factory reset your device. If your custom ROM doesn’t require a factory reset, then simply skip this step.
  4. Go back to TWRP main menu, tap on “Install” and select the Lineage os  ROM .zip file and gapps for lineage os that you transferred to your device in Step 1.
  5. After selecting the .zip file, do “Swipe to Confirm Flash” on the bottom of screen to begin the custom ROM installation process. This may take some time.
  6. Once your ROM is successfully flashed, you’ll see “Wipe cache/dalvik” option, select it and then do “Swipe to wipe” on bottom of screen.
  7. Once cache & dalvik wipe completes, hit the “Back” button on-screen and then select “Reboot System” button.

REQUIRED LINKS AND FILES FOR Redmi NOTE 3 LINEAGE OS 14.1 NOUGAT CUSTOM ROM:
, , ,
Share To:
Magpress

LineageOS Team

We are trying hard to provied Lineage os rom for every possible device.To support us like our facebook page and follow on facebook.

31 comments so far,Add yours

  1. UnknownDecember 31, 2016 at 4:16 PM

    The link is not for kenzo, it is for oneplus2. Please fix it. Thanks.

    ReplyDelete
  2. CelebiJanuary 2, 2017 at 6:17 AM

    Can you please make one for Kate as well?

    ReplyDelete
  3. UnknownJanuary 3, 2017 at 2:55 AM

    just wait

    ReplyDelete
  4. UnknownJanuary 3, 2017 at 2:59 AM

    I am waiting for the LineageOS of gemini.

    ReplyDelete
  5. UnknownJanuary 3, 2017 at 3:28 AM

    please build lineageOS for redmi 1s (armani)

    ReplyDelete
  6. AllandinoxJanuary 3, 2017 at 7:13 PM

    project : ido - xiaomi redmi 3/pro still not launching yet ?

    ReplyDelete
  7. UnknownJanuary 4, 2017 at 9:10 AM

    please make a Version for Kate usre

    ReplyDelete
  8. UnknownJanuary 5, 2017 at 11:22 PM

    is volte working?

    ReplyDelete
  9. UnknownJanuary 11, 2017 at 6:19 AM

    VoLTE is not working, only LTE is working.

    ReplyDelete
    Replies
    1. UnknownFebruary 6, 2017 at 6:04 PM

      Volte now working on 31-jan build.jio video calling also supported.

      Delete
  10. mayankJanuary 13, 2017 at 9:22 AM

    Are you people experiencing issues like:
    1) Torch not working everytime you click on button.
    2) phone Hangs and have to hard restart it?
    3) Pixel launcher not working?
    4) Volte offcourse not working however Jio voice call makes it possible?
    5) While switching mobile data sim card : Settings app crashes and automatically sms sim also changes?
    6) Phone automatically goes into do not disturb mode while calling or sometimes randomly anytime?

    ReplyDelete
    Replies
    1. KodokJanuary 28, 2017 at 3:01 AM

      1.yes. most of the time, my torch is fucked.
      2.yes, sometimes my phone freeze and reboot by itself.
      3. No, My pixel launcher work perfectly.
      4,5,6.havent try that yet.

      Delete
    2. UnknownFebruary 15, 2017 at 3:51 PM

      1. Y
      2. N
      3. N
      4. Dont know, my network doesnt support it.
      5. No crashes, but reverting changes for default SIM (only calling, SMS) after reboot.
      6.Y

      Delete
  11. Vulpup ExTexJanuary 25, 2017 at 5:14 AM

    charging with generic charger now doesn't work. i have to use original Samsung cable and adapter to charge my phone or use my pc. But bluetooth,gps and wifi works well.battery has some draining issue. signals keep loosing. overall, really happy with the rom. hopes the dialer and sms comes with dual sim support.

    ReplyDelete
    Replies
    1. Vulpup ExTexJanuary 25, 2017 at 5:17 AM

      i moved from Swing Rom. One thing that i miss from the ROM is the ability to take screenshot and turn on torchlight by long pressing menu and home button. hope that the new update add take screenshot and turn on/off torchlight at the button function option. One more feature that i would love to have is the reboot to recovery option by pressing power button so i dont have to use 3rd party apps to reboot to recovery.

      Delete
    2. KodokJanuary 28, 2017 at 2:57 AM

      you can turn on advanced reboot option in developer options

      Delete
  12. UnknownJanuary 29, 2017 at 8:02 AM

    Y para el modelo hennessy van a desarrollar alguna rom???

    ReplyDelete
  13. thanhhoaweb.netJanuary 30, 2017 at 10:28 PM

    please make a Version for redmi note 3 MTK

    ReplyDelete
  14. UnknownJanuary 31, 2017 at 6:34 PM

    https://download.lineageos.org/kenzo这个是官网吗？
    怎么添加网速显示栏，FPC指纹能用吗。
    我是中国大陆用户，谢谢

    ReplyDelete
  15. UnknownJanuary 31, 2017 at 6:34 PM

    https://download.lineageos.org/kenzo这个是官网吗？
    怎么添加网速显示栏，FPC指纹能用吗。
    我是中国大陆用户，谢谢

    ReplyDelete
  16. UnknownFebruary 3, 2017 at 5:00 PM

    Does the finger print scanner work?

    ReplyDelete
  17. Nicanor CharlesFebruary 12, 2017 at 7:08 AM

    Please build lineage os for Techno Phantom 5!!!

    ReplyDelete
  18. UnknownFebruary 12, 2017 at 5:00 PM

    Build info: kenzo-user 6.0.1 MMB29M 6.11.24 release-keys
    Serial number: 743ee8d5
    Description:
    Torch work but it seems not all times. It's bug. on cm13 it's work.I'm added report if this can help.
    sdcard as internal storage can't mountpoint but it's work in cm13.
    https://drive.google.com/file/d/0B6pKGm6-ZQG0NVFCOWpTTnk3TG1SWDZNbjVWaFlxQUluNjRV/view?usp=drivesdk

    ReplyDelete
  19. UnknownApril 11, 2017 at 8:47 AM

    is this for reno 3 mtk? if not can u make it?

    ReplyDelete
  20. AnonymousJune 10, 2017 at 2:49 AM

    Do u have lineage for redmi note 3 mediatek? (Hennessy)

    ReplyDelete
  21. ucup slowAugust 25, 2017 at 6:33 PM

    APAKAH BISA UNTUK REDMI NOTE 3 KENZO V6.0.1 MMB29M ? FAST RESPON PLEASE

    ReplyDelete

Subscribe to: Post Comments (Atom)